Written by
Miles Hartwell Editorial authorPublished September 11, 2026
Content status:
Verified
Error codeEr06
ApplianceDishwasher
Affected model seriesEIDW6105 / EIDW5905
Quick answer
Er06 — Electrolux dishwasher code Er06 indicates lower fan speed feedback is not correct.
Model compatibility: Electrolux reuses codes across series and model years, so Er06 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
Code Er06 on an Electrolux dishwasher is associated with lower fan speed feedback is not correct. Rule out simple external conditions first, then stop if the code comes back. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
Signs
Symptoms you may notice
drying or ventilation behavior may be abnormal
fan noise may be absent or unusual
cycle may stop with the code
Why it happens
Possible causes
lower fan problem
fan obstruction
speed-feedback wiring issue
control-board problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Disconnect power for several minutes.
Check for any externally visible obstruction around ventilation openings.
Restore power and run one cycle.
Do not reach internal fan components through openings.
Important safety warning. Stop if there is grinding, burning odor, or overheating.
Get help
When to call a technician
A recurring Er06 fan-speed code requires internal fan and feedback-circuit testing.
Seeing this code on your Electrolux appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Electrolux dishwasher repair in Los Angeles for drain, fill, circulation, drying, leak, latch, and electronic-control problems. Confirm coverage by ZIP.
It indicates lower fan speed feedback is not correct. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Stop using the dishwasher if the fan grinds, overheats, or produces an electrical odor. Otherwise, test once after the safe checks.
References
Sources & references
Electrolux EIDW6105/EIDW5905 service data sheet 154676604.
Ready to get your Electrolux appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
