Model compatibility: Electrolux reuses codes across series and model years, so H4 / B4 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
When an Electrolux dryer shows H4 / B4, the control is reporting incorrect wiring / installation condition. The code narrows the diagnostic path, but it does not by itself prove which part needs replacement. Use the full model number before following any model-specific diagnostic procedure.
Signs
Symptoms you may notice
dryer may show the code after installation
heating or power behavior may be abnormal
unit may not operate correctly
Why it happens
Possible causes
incorrect installation wiring
branch-circuit or terminal connection problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Stop using the dryer until the installation wiring has been verified.
Do not alter terminal-block or branch-circuit wiring unless you are qualified.
If the dryer was recently installed, contact the installer.
Have the power connection checked against the model installation instructions.
Important safety warning. Stop immediately if you smell overheating, see electrical damage, the breaker repeatedly trips, or the drum is mechanically jammed. Otherwise, stop after one safe reset/check cycle if the code returns.
Get help
When to call a technician
Schedule dryer repair if H4 / B4 returns after the safe checks. A technician can test the model-specific circuits associated with incorrect wiring / installation condition without guessing from the display alone.
Seeing this code on your Electrolux appliance?
Book a specialist visit for a clear estimate and approval before any repair.
It indicates incorrect wiring / installation condition. Check the model number because code meanings can vary by dryer platform.
A brief power reset is reasonable when there is no sign of overheating, wiring damage, or a tripped breaker. If the code returns, the underlying issue still needs diagnosis.
Do not continue if there is overheating, restricted airflow, electrical behavior, or abnormal drum movement. Correct any simple external issue and test only once.
References
Sources & references
Electrolux Owner Center, Laundry Dryer Error Code Guide.
Ready to get your Electrolux appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
