Written by
Miles Hartwell Editorial authorPublished September 11, 2026
Content status:
Verified
Error code30
ApplianceInduction Cooktop
Affected model seriesE36IC75FSS
Quick answer
30 — Electrolux induction cooktop code 30 indicates ac input voltage is too high at the three-zone induction module.
Model compatibility: Electrolux reuses codes across series and model years, so 30 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If your Electrolux induction cooktop displays 30, the control has detected ac input voltage is too high at the three-zone induction module. Start with the checks that are safe to perform without opening the appliance. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
Signs
Symptoms you may notice
one or more cooking zones may shut down
the cooktop may refuse to heat
the code may appear after a power event
Why it happens
Possible causes
incoming supply voltage outside the expected range
filter-board or power-board issue
internal power connection problem
induction generator power-supply problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Turn the cooktop off at the breaker.
Do not use the cooktop through an extension or temporary power source.
If the code followed a household power event, restore power only after the supply is stable.
Do not remove the cooktop or test live power terminals yourself.
Important safety warning. Stop immediately if the breaker trips, wiring smells hot, or the cooktop behaves unpredictably.
Get help
When to call a technician
Voltage and induction power-board testing for 30 should be performed by a qualified technician.
Seeing this code on your Electrolux appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Electrolux cooktop repair in Los Angeles for induction detection, touch controls, thermal shutdown, zone heating, ignition, and power-module faults. Confirm coverage by ZIP.
It indicates ac input voltage is too high at the three-zone induction module. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Do not use the cooktop if supply voltage is unstable, a breaker trips, or there is an electrical odor.
References
Sources & references
Electrolux E36IC75FSS service manual, induction error-code tables.
Ready to get your Electrolux appliance working again?
Book a repair online or call us — clear estimates and approval before any repair work begins.
