Written by
Miles Hartwell Editorial authorPublished September 11, 2026
Content status:
Verified
Error codeE-23
ApplianceMicrowave
Affected model seriesE30MH65GPSA / E30MH65GSSA
Quick answer
E-23 — Electrolux microwave code E-23 indicates preheat did not reach the preset temperature within the expected time.
Model compatibility: Electrolux reuses codes across series and model years, so E-23 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.
Plain language
What this code means
If your Electrolux microwave displays E-23, the control has detected preheat did not reach the preset temperature within the expected time. Start with the checks that are safe to perform without opening the appliance. Use the observed symptoms and the full model number to confirm the correct diagnostic path.
Signs
Symptoms you may notice
preheat or convection cycle may cancel
oven may not reach selected temperature
code may appear after several minutes
Why it happens
Possible causes
convection heater problem
convection motor issue
temperature-sensing issue
control-board problem
Before you call
Safe checks you can make
These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.
Cancel the cycle and let the oven cool.
Make sure exterior ventilation openings are clear.
Try one normal cycle after a power reset.
Do not open the cabinet or test high-voltage components.
Important safety warning. Stop if the microwave overheats, smells electrical, or repeatedly cancels.
Get help
When to call a technician
A recurring E-23 convection code requires internal heater, motor, sensor, and control diagnosis.
Seeing this code on your Electrolux appliance?
Book a specialist visit for a clear estimate and approval before any repair.
Electrolux microwave repair in Los Angeles for door, keypad, vent, convection, sensor, turntable, power, and heating problems. Confirm coverage by ZIP.
It indicates preheat did not reach the preset temperature within the expected time. Confirm the full model number because Electrolux diagnostic meanings can vary between control platforms.
You can try the safe external checks on this page and one power reset when appropriate. If the code returns, repeated resets are not a substitute for diagnosis.
Stop using convection functions if the code repeats or the unit overheats.
